Natural Mold Removal Products

There are several natural mold removal products that are very efficient at removing mold.

One such product is bleach, which kills all species of mold that it encounters as well as the spores. The surface will be clean and resistant to further growth of mold on that surface. Bleach is good for surface mold, but is not effective on porous surfaces. Countertops, tiles, glass and shower and bathtub surfaces are ideal for using bleach to kill mold.

Bleach however does not kill mold on wood or drywall. It takes care of the surface mold but won’t get to the spores and roots that are down below the surface. Those items will remain and the mold will grow again and return.

The mix of bleach to water to kill mold on surface areas is about 1 part bleach to 10 parts of water, or one cup of bleach to a gallon of water. The solution can then be sprayed onto the surface or mopped on from a bucket and use of a sponge. Gloves and good ventilation are in order due to the fumes that bleach gives off. Rinsing the surface after finishing is not necessary unless the surface is used for food preparation.

Borax is a natural cleaning product that does a good job in killing mold. If swallowed it is toxic, but other than that it is not. It does not emit fumes or chemicals and is perfectly safe to use.

Borax is a good deodorizer as well as a good cleaner for drains and toilets. It is used as an herbicide, and fungicide and an insecticide. It can also be stirred up with water and becomes an excellent solution to kill mold. It is a natural inhibitor of mold. It is very inexpensive and is available in supermarkets and box stores.

To make a mold killing solution with borax mix one cup of borax to one gallon of water. A scrub brush is then used with the borax solution to scrub the surface where the mold is located. Soak up any extra moisture and excess mold to prevent it from growing back. The surface does not need to be wiped off as leaving it will prevent further mold growth.

Another one of the natural mold removal products is vinegar. Vinegar is mildly acetic and kills 82% of all species of mold. It is very safe and non-toxic and it does not give off any dangerous fumes. Use vinegar that is white distilled. It is very inexpensive and is available in any supermarket.

Using a spray bottle pour some of the vinegar directly into the bottle. Spray the affected area and then let the area alone for about an hour. Then wipe the area so it is dry. This process can be repeated every few days to insure that the mold will not be growing back.

Ammonia will also kill surface mold but will not kill mold on porous surfaces. Once applied the areas should be wiped dry with a cloth. A solution of 50% of clear ammonia and 50% water works well with using ammonia as a mold-killing agent.

Hydrogen peroxide is very active and it kills mold. It is a good agent to use instead of bleach because it does not give off fumes. It is very inexpensive and easy to find at all of the supermarkets. Hydrogen peroxide is a bleaching agent so a small spot should be tested to be sure it would not discolor the area.

A spray bottle can be used to apply the hydrogen peroxide. Be sure to use 3% hydrogen peroxide in the spray bottle. Spray it on the effected area and let it sit for 10 minutes. Then scrub the area and wipe it dry. Vinegar and hydrogen peroxide can be used together to fight the mold more effectively.

One of the most effective natural mold removal products is tea tree oil. This product is more expensive but a little bit will go a long way. Tea tree oil is available at most natural health shops and it comes in a little bottle. It is anti-fungal and anti-bacterial and will kill all kinds of molds.

Mix the tea tree oil with water in a spray bottle at 1 teaspoon per cup of water. Spray the solution on the surface where the mold is located and then just leave it to dry as the residue will discourage further mold growth .Any of the unused solution can be stored as it will not lose its potency.

Grapefruit seed extract is another of the natural mold removal products that does an excellent job of killing mold. Like tea tree oil, it is not inexpensive, but it does not take very much to be effective. Grapefruit extract has no odor, as does tea tree oil so that is an advantage. Grapefruit extract kills mold naturally because the citric acid attacks the mold and disinfects the area. A solution of 10 drops of grapefruit extract to one cup of water will do the trick. Make a spray solution and leave it to dry.



Enjoyed this post? Share it!


5 thoughts on “Natural Mold Removal Products

  1. A half cup of vinegar per gallon of warm water is recommended.
    Apply it on the cleaned surfaces of the bathroom, let it stand for 15 minutes and then wash off with sufficient amount of water.
    Chlorine is a powerful whitener and disinfectant, but
    can cause negative health effects in people,
    plants, and animals.

    My homepage – mold removal San Jose

  2. If your wallpaper is in the first group, the wall coverings that just peel right off, enjoy the rest
    of your day. Any leak in the plumbing or problems in the ventilation need to
    be addressed in order to stop the mold from growing
    further. Come to think of it, vinegar is specifically made for cooking and
    flavoring, not for molds.

    Check out my weblog: mold remediation San Diego

  3. This tips are certainly great, I myself have used bleach which like you mentioned does kill all kinds of mold that it touches. However, these are perfect solutions only if the infected area is the surface of any structure. If the mold infestation is severe it will definitely take a trained specialist to eradicate the issue. Thanks!

Leave a comment

Your email address will not be published. Required fields are marked *