How to Remove Mould From A Carpet

Mould is a deleterious fungal infection which gets caught on surfaces and fabrics. They’re a right pest – not only do they make walls and carpets smell mouldy and rank, but they destroy the surface they’re blighting! On top of this, they have pose a serious hazard to your health. They can attack your immune system, exacerbate existing allergies, and if you are an asthma sufferer, they can wreak havoc on your condition. Thus, it’s imperative that you deal with mould the second it rears its head. Getting rid of it, unfortunately, is easier said than done – however help is at hand in the form of this guide. This page is full of hints and tips for cleaning mould, and should give you a significant hand when it comes to removing mould from carpets.

Mould flourishes in humid environs – they thrive on moisture, and multiply rapidly in these conditions. As we often like to keep our houses warm, or by token of the weather they are inadvertently warm, they can be a fertile breeding ground and basis for the proliferation of mould. There are, however, ways of limiting the capacity for the spread of these pests. For a start, you should keep your house overly ventilated – ensure it stays at a neutral temperature all year round. Open windows, go easy on central heating, etcetera. This might be easier said than done in some cases, but really do endeavour – this way, you may never have to worry about mould blighting your home ever! Put towels on a drying rack immediately after use, and put them through the washing machine on the hottest setting every week. Don’t leave them on your bed, or a carpeted floor, for any length of time after you’ve dried off. If you don’t do this, they can easily pick up funguses, so be wary of letting this responsibility slide!

If mould does occur, you should identify its source as soon as you can. Often, it is caused by damp. A glass of water being spilled, a pipe leaking or poor ventilation in a warm environment can lead to the burgeoning of mould. If the area is small, you may well be able to clean it yourself. However, in the event that the mould in your home has been inflicted due to a major spillage (or even a flood!), then really you need to speak to a carpet cleaning services professional. They truly are the experts when it comes to mould removal. Even if you feel you can take on the job yourself, it may still be worth speaking to an expert carpet cleaner – they may have some helpful tips and hints to help you shift mould from a carpet! You will find the best cleaning contractors have entire departments (or, at least, dedicated staff) who are specifically trained in removing mould from carpets. If you find the right cleaning agency for mould removal, you will also find it won’t cost you an arm and a leg. The finest carpet cleaning firms know that the public’s budgets are not what they were a few years ago, and won’t balk at working for low rates. If you can’t find a carpet cleaner who fits the bill, also check out general domestic cleaners and home cleaning companies in your area. They too will have worked on mould and other such fungal blights in their time, and will almost certainly be able to help. Get on that phone and see for yourself! Again, even if you do not use their cleaning services, they may be able to offer guidance on best practice. http://www.cleanerscarpet.co.uk/carpet-cleaning/N1-rug-cleaning-islington.html

Enjoyed this post? Share it!

 
 

Bathroom cleaning – how to remove dark mould off a plastic shower curtain

The reason why shower curtains become so mouldy is because they grow so damp. The reason they become so damp is due to their use as water shields in a typical bathroom set up. Whenever the curtain is drawn across, it prevents the rest of the bathroom from getting wet. A genius invention on the one hand, the downside to this design is that mould breeds freely in shower curtains because they get pulled back after every wash. This limits air circulation in the area where the curtain rests as hot moisture is trapped there. Such a design flaw. Even a well ventilated bathroom is liable to contribute this problem with people’s everyday use of the shower.

So what to do? Below is a set of simple home cleaning instructions in how to address the mould that presently sits on your plastic shower curtain.

1 – Remove the curtain

Begin by taking the curtain off its hooks entirely.

2 – Prepare an old bath towel

Sacrifice an old bath towel in the interests of restoring your shower curtain. Proceed to dampen one end of the towel in hot water.

3 – Scrub the curtain

Find an area where you can lay the shower curtain out freely. Usually this will be away from the bathroom area altogether. Once spread out properly, go about blotting all existing stains with the old bath towel, relying on the hot water to create the foundation for addressing the stains. This will suffice as a type of pre-soak.

4 – Introduce white vinegar to the mix

Rinse out your bathroom sink before placing the plug in. Apply equal parts white wine vinegar and hot water. Comb over the solution with hand, mixing it in a circular manner for 30 seconds.

5 – Soak the curtain

Retrieve you shower curtain from wherever you performed its pre-soak and place it into your bathroom sink’s solution. If your sink is comparatively small, be sure to tuck the whole curtain in regardless. In other words, don’t leave bits hanging off the side of the basin. Soak the curtain for an hour.

6 – Remove the curtain

Take the curtain out of the sink once the full hour has elapsed. Do this slowly in order to prevent your solution spilling. Don’t empty the basin yet though.

7 – Hook the curtain back up

Proceed to hook the shower curtain back up, peg by peg. Make sure the bottom of the curtain is laid out inside of the bath so any excess moisture drips off into it.

8 – Perform a post-soak

Having performed a pre-soak and then a full soak, it’s now time to quickly do a post-soak. Simply dampen that old towel again, this time placing it in your solution to make the most of the leftover vinegar. Add more hot water directly to the towel as well in order to assist the usefulness of the vinegar. Proceed to wipe the whole curtain with the towel. Resort to using a two-sided sponge instead of the towel if you find that stain residue remains.

9 – Rinse the curtain out

Simply activate your shower nozzle and apply hot water all over the curtain.

10 – Hang the curtain out to dry

Finally, remove your shower curtain once again, peg by peg, and hang it out to dry in the sun. Use the pegs to connect the curtain to the washing line. Return the plastic shower curtain to its home once it’s completely dry. http://www.londonhousecleaning.org.uk/fulham-end-of-tenancy-cleaning-W6/tenancy-cleaning-fulham.html

Enjoyed this post? Share it!

 
 

Bathroom Wall Mold Removal Tips

Mold can be a real problem in most households, starting out as a small spot and then growing to an eventual health hazard if left unchecked for longer periods of time. Mold removal is a fairly simple thing to deal with in smaller areas, but it becomes much more difficult if you let it spread over a larger one. In this case we’ll talk about possible ways you can deal with bathroom wall infesting a wall:

  • One way of dealing with the issue is to use a good deal of soapy, hot water mixed with baking soda to remove the mold. What you will need to get the job done is a teaspoon of liquid soap, a cup of baking soda, a few drops of peppermint oil and enough water to turn it into a paste. Mix it up with a part of bleach to two parts of water and then put that in a spray bottle. Spray the mold, then let it dry. Spray it once again and then srub it with a brush. Repeat the process for as long as it takes until the mold is gone, then replace any caulk or grout that has been infested by mold that can’t be cleaned completely.
  • You can also clean mold with vinegar in a pretty efficient way. Just put some distilled white vinegar in a spray bottle and use it straight on the spots where you have the mold. The acidity of vinegar will kill up to 82% of most common molds, so make sure you use it straight and without watering it down. Spray it on the surface you need to clean, then let it sit like that for an hour. You should let the room get some air during that time, so open up your windows. Once that is done you can wipe the area clean with a towel and some hot water. Moisture helps mold grow, so make sure you dry things out completely before you move on. Vinegar is non-toxic so you will have little to worry about in terms of fumes, as is the case with bleach.
  • You can use borax to fix most of your mold problems with ease. Borax is an excellent natural solution that combines insecticide properties with mold-killing power. Its cheap, easily found in most places and very effective. You can usually find it in your local stores available for use. You need to begin by vacuuming the surface of the wall with a HEPA vacuum cleaner. This will eliminate most of the large pieces while you’re at it and will minimize the spread of the spores. Then you need to use a brush and some borax to clean the area. Just mix a cup of borax in about a gallon of water or two and a half liters for those using the metric system. Make sure you keep the spread of the spores to a minimum as you work, so keep your doors closed. Wipe the borax solution when you’re done and let it dry. If you worry about mold growth again, you can simply spray the area with white vinegar once in a while to keep it disinfected.

http://www.endoftenancycleaning.org.uk/after-builders-cleaning/TW10-after-builders-cleaners-richmond-upon-thames.html

Enjoyed this post? Share it!

 
 

How to Remove Mold from Books

There is hardly anything more terrifying and frustrating to those of us in love with books than to find them covered with mold or mildew. Mold spores feed on organic substances and paper is one substance they can really grow on with ease. The following tips will give you the tools you need to address the issue:

The first thing you will need to do is to assess the damage on the surface, such as the cover, edges and bindings and whether it has managed to through to the actual pages. If you only have mildew and mold on the exterior, you will have a chance to brush it off easily and end it right there, keeping it from reforming.

If mold has found its way into the book itself, then you will need to address the situation as soon as possible before the damage becomes too much. You can go about it in two ways, the first one being to place books in a bag and into the freezer for a single night. The extreme cold will kill most mold types and prevent them from spreading further. Once you removed the book you’ll be able to dust of the mildew. Wipe it down gently with a cloth and some rubbing alcohol or some sort of antiseptic that won’t damage the pages. Never use bleach or any other harsh chemicals unless you want to destroy it beyond repair.

Another method that may be used that poses a bigger risk however is to place it in the microwave for a few short seconds and no more than that. Microwaves may destroy the mold, but you should still follow the same procedures to clean the books as mentioned above.

In both cases you could be left with a musty smell left behind from the procedure. If you want to remove that persistent and annoying odor, then you will need to leave them outside for a while on a nice, hot sunny day. Make sure you never keep it out overnight, since condensation could jumpstart the growth of mildew. Sunlight can hinder and eliminate mold spores with ease, making it a very effective counter to their spread.

If you want to keep it away from your books, then you need to keep a few things in mind. Mildew thrives in natural fibers, binding glue and paper, so this makes books a good environment to thrive in under the right circumstances. It thrives under temperatures ranging between the 77-86°F, so you must make sure you keep them away from musty areas during the hot summer months. Always make sure they are exposed to fresh and and far away from moisture. High humidity is the number one reason for mold and mildew, so a dehumidifier can help alleviate the problem before its too late.

You can also inhibit mold and mildew by the use of desiccants, such as silica gel and alumina which work great at absorbing moisture. You can place them in a closet with your books and they will get the job done. Chromium chloride can also work well, so you can place some granules on a screen so they can catch the moisture.

http://www.londoncarpetcleaner.co.uk/mattress-cleaning/NW3-mattress-cleaners-hampstead.html

Enjoyed this post? Share it!

 
 

Preventing Carpet Mold and Mildew

The smell of mildew on carpet is a very specific one, usually serving as the first hint that you have a problem on hand long before you manage to see its visual proof. It has a musty, dank smell that smells like the beginnings of a bog forming in your home and that is the last thing you’d want on your hands. The underlayment of a carpet can become a great place for mold spores to grow and expand. Mildew and mold can spread quickly and become a serious problem before long, so you must ensure that fails to happen as soon as you can. The following tips will help you gain the edge over your mold invaders:

 

  • One of the first things you have to keep in mind is that mold spores really thrive in dark areas, which means the underside of carpets are an excellent place, especially if they have a moist environment to feed on. Anywhere where you might have spilled water or have condensation going on might be fair game for mildew, so you should keep a close eye on such areas, as well as cleaning your carpet on a regular basis so it will be free of dirt and most of the dust particles we shed as we live in a home.
  • You should make sure you dry wet spots as quickly as possible if they occur on your carpet. Any moisture you may have inside the carpet may easily lead to mildew growth and spread. If the liquid gets under the carpet, its evaporation becomes more difficult, thus becoming a serious problem, combined with the lack of lighting and good conditions for mold spore growth.
  • If moisture does get under the carpet and you feel you might have mildew present, then you can save yourself the trouble of dealing with it later down the line if you give it a good steam cleaning. Steam cleaning will kill much of the mildew spores, thus making it easier to deal with their potential spread. The leftover moisture after a steam cleaning has to be dried, so you would do well to allow your carpet to dry off completely before you put it back in your home.
  • You can also use a dehumidifier in your basement and other areas that might have issues with higher moisture levels. Dehumidifiers running at all times in a basement or at least for several hour during a day and night cycle will help lower the risks of mold and mildew spores getting their foothold down there.
  • You should also clean your carpets once every month with a special solution. You can use baking soda, vinegar and water together so you can clean and prevent mildew from forming. Give it a good rinse when you’re done and let it dry completely before putting it back inside.

http://www.cleanershouse.co.uk/office-cleaning/SW19-commercial-cleaning-wimbledon.html

Enjoyed this post? Share it!

 
 

Natural Mold Cleaning Tips and Guidelines

High humidity can become a serious problem in a number of cases around our homes. With the right circumstances mold spores can grow into mold colonies, thus spreading and playing on our allergies. Black mold can be downright dangerous to our health, so you will need to address the issue by dealing with mold as soon as possible before it has a chance to get out of control. Dehumidifiers can be of great help in keeping moisture levels low, however you may still experience mold at times. There are a great many types of cleaners out there which are aimed toward mold, however they also have a good deal of hazardous chemicals among them. The following materials in this article are natural alternatives which get the job done much more safely:

  • You can make use of tea tree oil, which can be easily bought at health food stores and other locations. Although this is a more expensive option that the rest on the list, it works great against mold. The only unpleasant side to it would be the strong smell left behind for a couple of days, but its mold-killing power is undeniable. Just combine two teaspoons of the oil in two cups of water and spray the affected areas. You will see the results soon enough once you’re done.
  • You can also use grapefruit seed extract for your needs, which works in pretty much the same way as grapefruit seed extract. Its advantage is the fact that it has the same mold-killing strength minus the strong smell. Simply put about twenty drops or so in two cups of water and spray the area you want clean and let it dry.
  • One of the most easy to obtain mold cleaning materials you can use is right under your nose right now, quietly sitting in your kitchen. Vinegar has an amazing antifungal power, killing up to 82% of most mold spores, acting fairly quickly and leaving a quickly dispersing scent that lasts for a day at most. If you have some lighter stains on the wall, you can dilute vinegar and water in equal parts and use that on the wall. You should always use distilled white vinegar as to avoid the staining of all surfaces you’re using it on. You can spray it directly on the affected areas as well, letting it dry.
  • If you have a shower curtain made of plastic and it has been marred with mold and mildew, then you can clean it in the washing machine with some bath towels and a side order of baking soda and vinegar, half cup each. Place the baking soda during the washing cycle and the vinegar during the rinse cycle. Let it dry out and you’ll be done with the problem without a worry.
  • You can also use a 3% hydrogen peroxide to destroy mold and mildew during your cleaning efforts. You can use it straight to wipe mold off the affected areas or even spray it on them as well.
  • If you have any clothes stained by mildew and mold, then you can remove it with some lemon juice and salt. Make a paste of them and rub the area until you remove the stain, letting it dry in the sun each time.

Putney Carpet Cleaners

Enjoyed this post? Share it!

 
 

Mold Removal Quick Tips

Water is one of the main causes of mildew and mold growth, however finding the root of the problem may not always be as simple as it sounds. The following quick tips will provide you with a framework of reference on what you can do to deal with your mold issues, eliminating them for good. Let’s start with the first one on our list:

• Inspecting the pipes

If you see any mold near your water pipes, plumbing or waste lines, then this will likely mean you have a hidden leak on your hands. Allow the water to run, then do your best to inspect the areas around the mold spots to find the hole. You should keep in mind that water may travel in all directions, depending on the nature of the leak. This is especially relevant to drywall as that type of wall is absorbent and therefore vulnerable to mold.

• Never ignore mold

If you see mold, then this means you may have a very serious moisture problem on your hands, as it could cause more than just a musty smell and some cosmetic issues. Wood rot is a very serious problem that could cause structural damage as well as mold. You need to make sure you wipe mold away as soon as possible or you will suffer its side effects.

• Check out the vents

If you have any mold growing on the exterior walls and ceilings, then you must look for a leak in the roof. You will need to carefully measure the area of mold to a reference point such as a window or door. You must inspect the vents near the moldy area as well as the flashing, window wells and decks as well as any areas where the wood may be rotting. You must also check down for sloping areas that may have given way to moisture moving away from the spot of the leak. The same goes for the downspouts next to a wall. If you have too much moisture around the house and that water doesn’t flow away from the foundations, then you may have a serious moisture issue in your basement as a result.

• Condensation issues

If you have any mold forming around a ceiling or under a duct, but without signs of any leaks, then this may mean you’re dealing with excessive condensation. Warm and moist air can condense with ease, forming into water on cold areas and ducts. This condensation means you will have to deal with the poor insulation or vapor barrier you have on your hands. If water saturates the drywall and insulation, then this will allow mold spores to take root and grow as a result. The reverse of that will happen in cold weather, such as in areas where you have unsealed joints in the ductwork.

• Testing for mold

If you have seen any suspicious-looking spots around the area, making them seem like dirt you can’t wash away, then you may have mold on your hands. You can easily find whether they are really mold or not by mixing bleach and water in a 1:16 ratio. Dab that on the wall and examine the spot after that. If it lightens up quickly or if it keeps coming back, then it is most likely mold. You can also use mold testing kits to ensure it really is what you suspect it is.

• Killing mold

Once you’re sure you’re dealing with mold, then you will need to spray and clean the area with an antimicrobial treatment so it won’t come back. For larger areas such as basements and attics it would be best to fog the entirety of a room for maximum results.

More tips at http://www.sofacleaners.org.uk/W6-cleaning-services-fulham/cleaning-companies-W6.html

Enjoyed this post? Share it!

 
 

Black Mold Cleaning Tips

If you happen to spot any mold around your home, you should make sure you remove it as soon as possible to avoid the possible future health issues you may experience. You should know a few things about mold, especially the black mold variety. If you don’t have the funds to hire a professional or you don’t want to, you should always make sure you take measures to protect yourself from its toxic effects. This article will give you details on what you can do to clean it safely:

 

  • Protection from Mold

If you have any mold in your home, then you should always be aware that its spores will be airborne at most times. You should therefore make sure you’re wearing some sort of protection against the spores, such as a face mask. You can also wear rubber gloves to avoid mold touching your skin. This is especially important when it comes to black mold, as it is tenacious and dangerous in all cases. If black mold spores get in any scratches on your skin or your lungs, this could mean serious health issues. Stay safe and keep the area well-ventilated at all times.

 

Fixing the leaks

The first thing you have to do if you want to keep things contained is to ensure you have eliminated the source of moisture and humidity that led to the growth of mold in the first place. Unless you do that all your efforts will be in vain and the spores will bloom soon after your cleaning. Mold grows at accelerated rates, sometimes less than 48 hours to begin growth again.

 

Containment procedures

You should treat black mold infestation as an infectious disease, sealing off the room from other areas of your home to prevent the spread of the spores. Once you start cleaning the spores will get airborne quickly, spreading and sticking to other areas, your clothes and more, depending on the level of infestation you’re dealing with. Sealing the area will prevent the spread, cutting it off at the source and allowing you to focus on its elimination.

 

Dusting

You should make sure you also do your best to minimize the amount of dust spread during your cleaning of black mold. Dust is one of the easiest ways for black mold spores to spread, as they can hitch a ride on the pieces that make it up, such as skin dander, little bits of hair and dirt brought from the outside, wood fibers and more. You should make sure you avoid spreading dust from cleaning as much as possible to limit the area of contamination.

 

Misting

If you plan on cleaning black mold and the surface where you’ve seen it is dry you should make sure mist it with water to prevent the spread of the spores. If you don’t do that you will help them spread as soon as you disturb them. Make sure you don’t soak the reaction too much however.

 

Cleaning

When you’re cleaning black mold in small places you can make do with a mix of bleach and water. You can also wash the area with the mixture if the space allows it, but if the area is far too large you may need professional help or better commercial products.

 

More tips http://www.cleanerscarpetcleaning.com/wandsworth-upholstery-cleaning-SW18/upholstery-cleaner-wandsworth.html

Enjoyed this post? Share it!

 
 

Easy Mold Removal Tips

The main cause of mildew and mold infestation is water, but in many cases dealing with the problem may be more difficult than it seems at first. The following tips will give you a tip on what you need to do to address the issue successfully if you want to get things done with minimum fuss.

Inspecting the pipes and drains

This is one of the first things that need doing, as they will be one of the main reasons for your mold issues. This means looking at all plumbing fixtures, pipes and even the walls around them for any possible leaks, damp spots and the like. You should remember that water may flow in different directions, depending on the nature of the material it flows in so check the entire area around possible leaks.

Never ignore mold

In many cases mold can be the end sign of a serious problem with moisture buildup inside your ceilings or walls, which could lead to rotting wood, structural instability and worse. Never underestimate the problem and do your best to fix it as soon as possible.

Inspect all vents, window wells and flashing

If you have any mold that grows on your ceiling or the walls outside, you should check for roof leaks as well as wall issues. You can measure the distance to the area where you’ve seen mold, thus leading you to a certain area of searching you can see for yourself for any signs of the underlying problem. Check out the vents, roof flashing and decks for any rotting wood and address the problem as soon as you can. If you have increased moisture around the foundations of the house, then you may experience some serious issues such as moisture seeping through the micro-cracks in the area itself.

Condensation issues

If you can’t find any signs of leaks on the roof or the foundations, then you may be dealing with a condensation issue, which means bad ductwork and poor insulation. Warm and moist air can condense and form water on the ducts carrying the cold outside air through the crawl spaces and the attic itself. This means you’re missing a good vapor barrier. Once that happens the ever-present mold spores will soon begin growing and thus creating their own unique set of issues. If you’re dealing with cold weather you may experience a different set of problems, such as moisture forming everywhere you have warm air escaping through the gaps.

Testing the spots

Although you can easily spot and recognize mold, you should always make sure you check for any hidden growths that simply make a surface look like its dirty. Use a bit of bleach, dilluted in about sixteen parts of water and dab that on the wall. If you see the spot lighten up or if it keeps coming back after cleaning it, no matter what then it might be mold. You can find mold testing kits in most hardware stores if you need any more specific help.

 

More cleaning tips at http://www.cleanerscarpetcleaning.co.uk/SW11-cleaning-services/battersea-cleaners-SW11.html

Enjoyed this post? Share it!